| Required PTO HP | 20 – 50HP | Flywheel Housing System | Easy To Open Clamshell |
| Chipping Diameter | 6in | Flywheel Housing Thickness | 0.3in |
| In-feed Chute Opening | 25.6 x 25.2 in | Flywheel Shaft | 2in |
| In-feed Opening | 6 x 8in | Hydraulic Oil | 5.3 gal of ISO 32 or ISO 46 (warmer climates) |
| In-feed Chute | Quick folding for transport/storage | Hydraulic Pump | Yes – Belt Driven |
| In-feed System | Self Contained Hydraulic System | Discharge Chute | 360 Degree Swivel |
| In-feed Drive | Forward/Neutral/Reverse with Variable Speed: (0-75 ft/min) | PTO Shaft | Shear Pin Protected PTO Shaft Included |
| In-feed Roller Size | 8in Chisel Tooth | PTO Shaft Length | T4/31.1-38.3 in |
| In-feed Roller Pressure | Adjustable via Spring Tension | Number of Blades | 4 Reversible Blades |
| Quick Hitch Compatible | Cat 1 Quick Hitch | Finish | Powder Coat Paint |
| 3 Point Hitch | CAT1 | Warranty | 1 Year |
| Flywheel Speed | 540 RPM | Dimensions (L x W x H) | 45x33x45 in |
| Flywheel Drive System | Direct Drive | Net Weight | 695 lbs |
| Flywheel Diameter | 24in | Gross Weight | 882 lbs |
| Flywheel Thickness | 0.75in |
WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.
Reviews
There are no reviews yet.