| Engine | DUCAR Dh420(E) | Cutting Height | 15 in Above Ground |
| Certification(S) | EPA Phase III, CARB Phase III | Cutting Depth | 10 in Below Ground |
| Engine Type | Single Cylinder, 4 Stroke, Air-Cooled, OHV | Rotary Chassis | Yes |
| Displacement/ HP | 420 cc; 15 HP | Max. Rotation Angle | 65 Degrees |
| Start | E-Start | Max. Rotating Distance | 31.5 in |
| Battery | 12 V 20 Ah Lead-Acid | Tow Bar | Included |
| Brake | 2 x Wheel Lock | Coupler | 2 in Ball |
| Belt | 2 x V-Belts | Wheelbase | 32 in |
| Belts Material | Kevlar | Max. Speed | Off-Road Only and Max. Speed 15mph |
| Clutch | Centrifugal Clutch | Front Wheel | 10 in |
| Cutting Wheel Dia. | 14 in | Tire | 145 / 70-6 Tubeless Tyre |
| Cutting Wheel Thickness | 0.47 in | Assembled Weight | 303 lbs |
| Carbide Tip Qty. | 12 Pcs | Gross Weight | 353 lbs |
| Tip Holder Material | 42CrMo | Packing Size | 45 x 30 x 29.5 in |
| Carbid Tip Material | YG11C Alloy |
WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.
Reviews
There are no reviews yet.